Export limit exceeded: 25977 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 25977 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25977 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98921 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ovl: fix UAF in ovl_do_mkdir() debug print ovl_do_mkdir() prints the input dentry with %pd after vfs_mkdir(). Since commit fe497f0759e0 ("VFS: change vfs_mkdir() to unlock on failure."), vfs_mkdir() calls end_creating() on the input dentry on failure and may replace it on success, so the post-call %pd can use-after-free the dentry when CONFIG_OVERLAY_FS_DEBUG is enabled. Print the dentry before the call and only the result afterward. | ||||
| CVE-2026-98920 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix missing alloc tagging of direct mempool allocations Commit 1d78d56c43ef ("netfs: Fix folio_queue ENOMEM in writeback by adding a mempool") added a mempool for the folio_queues and made the request, subrequest and folio_queue allocations distinguish between writeback and everything else. Writeback is part of memory reclaim and must not fail due to ENOMEM, so it allocates under GFP_NOFS through mempool_alloc(), which may dip into the pool's reserve and, if that runs empty, wait for elements to be returned. The GFP_KERNEL paths, which can return -ENOMEM to their callers, invoke the pool's ->alloc() callback directly instead. The direct call, however, skips the alloc_hooks() wrapper that the mempool_alloc() macro provides. The pool callbacks, mempool_alloc_slab() and mempool_kmalloc(), call kmem_cache_alloc_noprof() and kmalloc_noprof() and rely on current->alloc_tag having been set by the caller. With CONFIG_MEM_ALLOC_PROFILING_DEBUG=y this leads to current->alloc_tag not set WARNING: ./include/linux/alloc_tag.h:161 at __alloc_tagging_slab_alloc_hook alloc_tag was not set WARNING: ./include/linux/alloc_tag.h:166 at __alloc_tagging_slab_free_hook at allocation and free time respectively, as reported when reading files on a CIFS mount. The allocations are also missing from /proc/allocinfo. Wrap the direct ->alloc() invocations in alloc_hooks() with a new mempool_alloc_noreserve() helper in include/linux/mempool.h, next to the other alloc_hooks()-wrapped macros such as mempool_alloc(). The GFP_KERNEL paths keep their failable allocation semantics, they just get tagged now. | ||||
| CVE-2026-98919 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: harden adjust_idledly() against divide-by-zero and overflow adjust_idledly() has several corner-case issues flagged during review: 1. If xe_gt_clock_init() failed to recognise the crystal clock, gt->info.timestamp_base is 0, which makes idledly_units_ps also 0. The subsequent DIV_ROUND_CLOSEST(..., idledly_units_ps) is then a divide-by-zero and panics the kernel. 2. The tick-to-ns conversions are done in u32: idledly * idledly_units_ps, (maxcnt - 1) * 1000 Both overflow u32 before DIV_ROUND_CLOSEST() sees them. 3. If IDLE_WAIT_TIME reads back as 0, maxcnt evaluates to 0 and the maxcnt - 1 clamp wraps to 0xFFFFFFFF in u32. 4. The register only stores whole ticks, so the clamped ns value has to be converted to ticks and back. DIV_ROUND_CLOSEST() can round that conversion up past maxcnt: maxcnt = 640 ns, one tick = 666664 ps clamp: maxcnt - 1 = 639 ns ns -> ticks: 639000 / 666664 = 0.958 -> rounds to 1 tick tick -> ns: 1 * 666664 / 1000 = 667 ns 667 ns is programmed into RING_IDLEDLY, but 667 >= maxcnt (640), so xe_gt_WARN_ON() fires again on every subsequent init. Return early if timestamp_base is 0 (the unknown-crystal path). Do the conversions in u64 via the *_ULL() helpers so they cannot wrap. Clamp with a floor (DIV_ROUND_DOWN_ULL) so the programmed delay stays strictly below maxcnt, and guard the maxcnt == 0 case with a zero delay while still writing RING_IDLEDLY so INHIBIT_SWITCH_UNTIL_PREEMPTED is cleared. v2: Drop the redundant warn on the timestamp_base == 0 path; xe_gt_clock_init() already warns on an unrecognised crystal clock. Keep the early return to avoid the divide-by-zero. - Vinay v3: Field-mask the RING_IDLEDLY write with REG_FIELD_PREP(IDLE_DELAY, ...) instead of writing the raw tick count, which could clobber INHIBIT_SWITCH_UNTIL_PREEMPTED and reserved bits. Split the inhibit-switch clear from the maxcnt clamp so a set inhibit bit no longer forces a needless delay overwrite when the delay itself is already valid. Use gt_to_xe(gt) instead of gt_to_xe(hwe->gt). (cherry picked from commit d864065ea25e9d12897c175de9176ce46677e176) | ||||
| CVE-2026-98918 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/ops-common: use a page-aligned address in damon_ptep_mkold() __damon_va_prepare_access_check() picks a random byte address within the region and stores it in r->sampling_addr. damon_va_mkold() passes it into a page table walk, which hands it to damon_ptep_mkold() as the address of the page to sample: damon_va_mkold(mm, r->sampling_addr) damon_va_walk_page_range(mm, addr, addr + 1) damon_mkold_pmd_entry() damon_ptep_mkold(pte, vma, addr) ptep_test_and_clear_young(vma, addr, pte) mmu_notifier_clear_young(mm, addr, addr + PAGE_SIZE) For arm64, before commit 6f0e1142173a ("arm64: mm: support batch clearing of the young flag for large folios"), the contpte helper walked exactly CONT_PTES entries from the aligned-down page table pointer and used @addr only to pass down to each entry, so an unaligned value was harmless: ptep = contpte_align_down(ptep); addr = ALIGN_DOWN(addr, CONT_PTE_SIZE); for (i = 0; i < CONT_PTES; i++, ptep++, addr += PAGE_SIZE) Now the range to walk is derived from @addr instead: end = addr + nr * PAGE_SIZE, rounded up to CONT_PTE_SIZE. For a sample in the last page of a contpte block, the sub-page offset puts end just past the block boundary, so the round-up lands a whole block further and the walk clears PTE_AF in CONT_PTES entries beyond the sampled block. For the last block in a page table page, those entries are past the end of that page, so the walk writes into the page that follows. Triggered by the full 7.1/7.2 kernel selftest suite on arm64 (EC2 c/m6g.4xlarge). The kernel sometimes crashes at or shortly after the DAMON test. What the overrun does depends on the page that happens to follow the page table, so there is no single signature. If that page is read-only, the write faults in the sampling path itself: Unable to handle kernel write to read-only memory at virtual address ffff0003c5d2d000 FSC = 0x0f: level 3 permission fault CM = 0, WnR = 1, TnD = 0, TagAccess = 0 CPU: 10 UID: 0 PID: 3487 Comm: kdamond.2 pc : contpte_test_and_clear_young_ptes+0x70/0xc0 lr : damon_ptep_mkold+0x1e8/0x1f8 Call trace: contpte_test_and_clear_young_ptes+0x70/0xc0 (P) damon_mkold_pmd_entry+0x150/0x170 walk_pmd_range+0x110/0x2b0 walk_pud_range+0x10c/0x208 walk_pgd_range+0x134/0x258 __walk_page_range+0x98/0x1b0 walk_page_range_vma_unsafe+0x90/0x148 walk_page_range_vma+0x28/0x40 damon_va_walk_page_range+0x114/0x2b8 damon_va_prepare_access_checks+0xec/0x1a8 kdamond_fn+0x534/0x770 kthread+0x128/0x138 ret_from_fork+0x10/0x20 Otherwise the page is writable, the PTE_AF clearing succeeds silently and the damage only surfaces later, in whatever happened to own the page, so the backtrace is unrelated to DAMON and differs between runs. Pass a page-aligned address to the ptep_test_and_clear_young() call in damon_ptep_mkold(), which is the only place DAMON can reach contpte_test_and_clear_young_ptes() from. Nothing else sees the aligned address, and r->sampling_addr itself is left as is, so the sampling and region bookkeeping semantics are unchanged. | ||||
| CVE-2026-98917 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: parisc: Increase kernel stack size to 32kb For 64-bit Linux kernels, increase the default kernel stack size (THREAD_SIZE_ORDER) to 32 kB, in order to avoid kernel crashes which have been triggered recently when building the debian vtk9 package with gcc 17: stackcheck: kworker/u128:0 will most likely overflow kernel stack (sp:179a83af0, stk bottom-top:179a80000-179a84000) Kernel panic - not syncing: low stack detected by irq handler - check messages CPU: 2 UID: 0 PID: 30760 Comm: kworker/u128:0 Tainted: G W 6.18.46-dirty #1 NONE Tainted: [W]=WARN Hardware name: 9000/800/rp3440 Workqueue: writeback wb_workfn (flush-259:0) Backtrace: [<000000004022f050>] show_stack+0x70/0x90 [<000000004022378c>] dump_stack_lvl+0x124/0x190 [<000000004022382c>] dump_stack+0x34/0x48 [<000000004020212c>] vpanic+0x204/0x648 [<00000000402025c4>] panic+0x54/0x58 [<0000000040232230>] do_cpu_irq_mask+0x3f8/0x440 [<0000000040227070>] intr_return+0x0/0xc | ||||
| CVE-2026-98916 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: check link is beaconing for color change When trying to do a color change, validate that the link is beaconing first, to avoid calling the driver with an invalid link. | ||||
| CVE-2026-98915 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: video-i2c: use vb2_video_unregister_device on driver removal The driver uses vb2_fop_release() as its file release operation, so vb2_video_unregister_device() should be used instead of video_unregister_device() during driver removal. This ensures that the vb2 queue is properly disconnected before the video device is unregistered. | ||||
| CVE-2026-98914 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: cap ATOM command table nesting depth Cap nesting at 32 levels with execute_depth and return -ELOOP when exceeded. | ||||
| CVE-2026-98913 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: thunderx: fix PTP device ref leak in nicvf_probe() cavium_ptp_get() acquires a reference to the PTP PCI device through pci_get_device(). If any initialization step fails after cavium_ptp_get(), the PTP PCI device reference is leaked. Add a common error path to release the PTP reference before returning from probe failures. | ||||
| CVE-2026-98912 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: oss: Reject reads that cannot fit the next event snd_seq_oss_read() checks whether the next queued OSS sequencer event fits in the remaining userspace buffer before removing it from the read queue. The check is inverted. It currently stops when the event is smaller than the remaining buffer, so a normal 4-byte event is not copied for an 8-byte read buffer. Conversely, an 8-byte event can be copied for a smaller read count. Break only when the remaining userspace buffer is smaller than the next event, and report -EINVAL if no complete event has been copied. This prevents an undersized read from looking like end-of-file while leaving the event queued for a later read with a large enough buffer. | ||||
| CVE-2026-98911 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: fix the error path in dpaa2_switch_rx() In case of an error in dpaa2_switch_rx(), the dpaa2_switch_free_fd() function is called in order to free the FD. This is incorrect since the dpaa2_switch_free_fd() is intended to be used on Tx frame descriptors, meaning that it expects in the software annotation area of the FD data to find a valid skb pointer on which to call dev_kfree_skb(). Fix this by extracting the dma_unmap_page() from dpaa2_switch_build_linear_skb() directly into the dpaa2_switch_rx() function. This allows us to directly use free_pages() in case of an error before an SKB was created and kfree_skb() afterwards. | ||||
| CVE-2026-98910 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Unwind debug trap enable on copy_to_user failure If kfd_dbg_trap_enable() fails while copying runtime_info to userspace, it had already activated the trap, set debug_trap_enabled, taken an extra process reference, and opened the debug event file. Return -EFAULT without unwinding that state, leaving inconsistent trap state and a refcount imbalance that could break later DISABLE/ENABLE. On copy_to_user failure, deactivate the trap and undo the rest of the enable setup before returning. | ||||
| CVE-2026-98909 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: cpsw_new: unregister devlink on port registration failure cpsw_probe() registers devlink before registering the CPSW ports. If cpsw_register_ports() fails, the error path only unregisters the notifiers and then releases the lower level resources. It does not undo the successful cpsw_register_devlink() call, leaving the devlink instance and its parameters registered after probe has failed. Add a devlink cleanup label for the path where devlink registration has already succeeded, and use it when port registration fails. | ||||
| CVE-2026-98908 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: microchip: sparx5: clean up PSFP resources on flower setup failure sparx5_tc_flower_psfp_setup() allocates PSFP stream gate, flow meter and stream filter resources before adding VCAP actions. If a later step fails, the resources allocated earlier in the function are not unwound. Add error paths to release the stream filter, flow meter and stream gate when setup fails after they have been acquired. Also make sparx5_psfp_fm_add() return the acquired flow-meter id before the existing-flow-meter early return. When an existing flow meter is reused, sparx5_psfp_fm_get() increments its pool reference count, but the caller previously kept psfp_fmid as 0. If a later setup step failed, the error path could try to delete flow-meter id 0 instead of the reused flow meter, leaving the incremented reference behind. | ||||
| CVE-2026-98907 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: protect sb_write_pointer() with invalidate lock sb_write_pointer() reads the super block from the block device page cache using read_cache_page_gfp(). This has the same race with BLKBSZSET as the one fixed by commit 3f29d661e568 ("btrfs: sync read disk super and set block size"). Take the mapping invalidate lock around read_cache_page_gfp() to serialize the read against block size changes. | ||||
| CVE-2026-98906 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: lan966x: restore RX state on reload failure lan966x_fdma_reload() backs up rx->page_pool and rx->fdma before reallocating the RX resources for the new MTU. If the allocation fails, the restore path puts these fields back before restarting RX. However, the reload path also updates rx->page_order and rx->max_mtu before calling lan966x_fdma_rx_alloc(). These fields are not restored on failure, so RX can be restarted with the old pages, old FDMA state and old page pool, but with the page geometry from the failed new MTU. This can make the XDP path advertise a frame size derived from the new page_order while the actual RX pages still come from the old allocation. For example, after a failed reload to a jumbo MTU, xdp_init_buff() may be called with a frame size larger than the restored RX pages. lan966x_fdma_rx_alloc_page_pool() also registers the newly allocated page pool with each port's XDP RXQ before fdma_alloc_coherent() is called. If fdma_alloc_coherent() fails, the new page pool is destroyed, but the rollback path does not restore the per-port XDP RXQ mem model registration either. Save and restore rx->page_order and rx->max_mtu, and restore the old page pool registration for each port's XDP RXQ before RX is started again. This keeps the restored RX state consistent after a failed reload. | ||||
| CVE-2026-98905 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Properly acquire queue buffers in CRIU restore When kfd_queue_acquire_buffers() was split off from set_queue_properties_from_user(), set_queue_properties_from_criu() was missed. Thus, set_queue_properties_from_criu() is not filling out the buffer fields of queue_properties, which can come up when subsequent code expects them to be non-null. Add the proper call to kfd_queue_acquire_buffers(), and also use the right cast types in set_queue_properties_from_criu() (which were missed at the same time) (cherry picked from commit 88ed96abbbe27b70193544fbc1ee06448c274714) | ||||
| CVE-2026-98904 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: imx: Use devm_pm_runtime_enable() sashiko complained about early usage of the device while probe isn't completed. This can be mitigated by delaying the pm_runtime_enable() into the removal path instead doing it early. This ensures that in an error case the device is removed (and imx_mu_shutdown()) before pm_runtime_disable() so we don't have to do this manually. For the order to work, lets move devm_mbox_controller_register() until after the pm-runtime part. So the reverse order will be mbox-controller removal followed by disabling pm runtime. Use devm_pm_runtime_enable(), remove manual pm_runtime_disable() invocations and move the pm_runtime handling in probe before devm_mbox_controller_register(). | ||||
| CVE-2026-98903 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: imx: Add a channel shutdown field sashiko complained about possible teardown problem. The scenario CPU 0 CPU 1 imx_mu_isr() imx_mu_shutdown() imx_mu_xcr_rmw(priv, IMX_MU_RCR, 0, IMX_MU_xCR_RIEn(priv->dcfg->type, cp->idx)); imx_mu_specific_rx() imx_mu_xcr_rmw(priv, IMX_MU_RCR, IMX_MU_xCR_RIEn(priv->dcfg->type, 0), 0); free_irq() The RX event remains enabled because in this short window the RX event was disabled in ->shutdown() while the interrupt was active and then enabled again by the ISR while ->shutdown waited in free_irq(). This race requires timing and if happens can be problematic on shared handlers if the "removed" channel triggers an interrupt. In this case the irq-core will shutdown the interrupt with the "nobody cared" message. Introduce imx_mu_con_priv::shutdown to signal that the channel is shutting down. This flag is set with the lock held (by imx_mu_xcr_clr_shut()). The unmask side uses imx_mu_xcr_set_act() which only enables the event if the channel has not been shutdown and serialises on the same lock. | ||||
| CVE-2026-98902 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: md/raid5: let stripe batch bm_seq comparison wrap-safe Once the 32-bit seq wraps, a newer bm_seq can look smaller than old, so .. covert to wrap-safe calculate way. | ||||