Export limit exceeded: 421008 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 26141 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26141 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-22030 | 1 Linux | 1 Linux Kernel | 2025-10-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm: zswap: fix crypto_free_acomp() deadlock in zswap_cpu_comp_dead() Currently, zswap_cpu_comp_dead() calls crypto_free_acomp() while holding the per-CPU acomp_ctx mutex. crypto_free_acomp() then holds scomp_lock (through crypto_exit_scomp_ops_async()). On the other hand, crypto_alloc_acomp_node() holds the scomp_lock (through crypto_scomp_init_tfm()), and then allocates memory. If the allocation results in reclaim, we may attempt to hold the per-CPU acomp_ctx mutex. The above dependencies can cause an ABBA deadlock. For example in the following scenario: (1) Task A running on CPU #1: crypto_alloc_acomp_node() Holds scomp_lock Enters reclaim Reads per_cpu_ptr(pool->acomp_ctx, 1) (2) Task A is descheduled (3) CPU #1 goes offline zswap_cpu_comp_dead(CPU #1) Holds per_cpu_ptr(pool->acomp_ctx, 1)) Calls crypto_free_acomp() Waits for scomp_lock (4) Task A running on CPU #2: Waits for per_cpu_ptr(pool->acomp_ctx, 1) // Read on CPU #1 DEADLOCK Since there is no requirement to call crypto_free_acomp() with the per-CPU acomp_ctx mutex held in zswap_cpu_comp_dead(), move it after the mutex is unlocked. Also move the acomp_request_free() and kfree() calls for consistency and to avoid any potential sublte locking dependencies in the future. With this, only setting acomp_ctx fields to NULL occurs with the mutex held. This is similar to how zswap_cpu_comp_prepare() only initializes acomp_ctx fields with the mutex held, after performing all allocations before holding the mutex. Opportunistically, move the NULL check on acomp_ctx so that it takes place before the mutex dereference. | ||||
| CVE-2025-22028 | 1 Linux | 1 Linux Kernel | 2025-10-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: vimc: skip .s_stream() for stopped entities Syzbot reported [1] a warning prompted by a check in call_s_stream() that checks whether .s_stream() operation is warranted for unstarted or stopped subdevs. Add a simple fix in vimc_streamer_pipeline_terminate() ensuring that entities skip a call to .s_stream() unless they have been previously properly started. [1] Syzbot report: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 5933 at drivers/media/v4l2-core/v4l2-subdev.c:460 call_s_stream+0x2df/0x350 drivers/media/v4l2-core/v4l2-subdev.c:460 Modules linked in: CPU: 0 UID: 0 PID: 5933 Comm: syz-executor330 Not tainted 6.13.0-rc2-syzkaller-00362-g2d8308bf5b67 #0 ... Call Trace: <TASK> vimc_streamer_pipeline_terminate+0x218/0x320 drivers/media/test-drivers/vimc/vimc-streamer.c:62 vimc_streamer_pipeline_init drivers/media/test-drivers/vimc/vimc-streamer.c:101 [inline] vimc_streamer_s_stream+0x650/0x9a0 drivers/media/test-drivers/vimc/vimc-streamer.c:203 vimc_capture_start_streaming+0xa1/0x130 drivers/media/test-drivers/vimc/vimc-capture.c:256 vb2_start_streaming+0x15f/0x5a0 drivers/media/common/videobuf2/videobuf2-core.c:1789 vb2_core_streamon+0x2a7/0x450 drivers/media/common/videobuf2/videobuf2-core.c:2348 vb2_streamon drivers/media/common/videobuf2/videobuf2-v4l2.c:875 [inline] vb2_ioctl_streamon+0xf4/0x170 drivers/media/common/videobuf2/videobuf2-v4l2.c:1118 __video_do_ioctl+0xaf0/0xf00 drivers/media/v4l2-core/v4l2-ioctl.c:3122 video_usercopy+0x4d2/0x1620 drivers/media/v4l2-core/v4l2-ioctl.c:3463 v4l2_ioctl+0x1ba/0x250 drivers/media/v4l2-core/v4l2-dev.c:366 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl fs/ioctl.c:892 [inline] __x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f2b85c01b19 ... | ||||
| CVE-2025-22023 | 1 Linux | 1 Linux Kernel | 2025-10-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Don't skip on Stopped - Length Invalid Up until commit d56b0b2ab142 ("usb: xhci: ensure skipped isoc TDs are returned when isoc ring is stopped") in v6.11, the driver didn't skip missed isochronous TDs when handling Stoppend and Stopped - Length Invalid events. Instead, it erroneously cleared the skip flag, which would cause the ring to get stuck, as future events won't match the missed TD which is never removed from the queue until it's cancelled. This buggy logic seems to have been in place substantially unchanged since the 3.x series over 10 years ago, which probably speaks first and foremost about relative rarity of this case in normal usage, but by the spec I see no reason why it shouldn't be possible. After d56b0b2ab142, TDs are immediately skipped when handling those Stopped events. This poses a potential problem in case of Stopped - Length Invalid, which occurs either on completed TDs (likely already given back) or Link and No-Op TRBs. Such event won't be recognized as matching any TD (unless it's the rare Link TRB inside a TD) and will result in skipping all pending TDs, giving them back possibly before they are done, risking isoc data loss and maybe UAF by HW. As a compromise, don't skip and don't clear the skip flag on this kind of event. Then the next event will skip missed TDs. A downside of not handling Stopped - Length Invalid on a Link inside a TD is that if the TD is cancelled, its actual length will not be updated to account for TRBs (silently) completed before the TD was stopped. I had no luck producing this sequence of completion events so there is no compelling demonstration of any resulting disaster. It may be a very rare, obscure condition. The sole motivation for this patch is that if such unlikely event does occur, I'd rather risk reporting a cancelled partially done isoc frame as empty than gamble with UAF. This will be fixed more properly by looking at Stopped event's TRB pointer when making skipping decisions, but such rework is unlikely to be backported to v6.12, which will stay around for a few years. | ||||
| CVE-2023-52929 | 1 Linux | 1 Linux Kernel | 2025-10-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvmem: core: fix cleanup after dev_set_name() If dev_set_name() fails, we leak nvmem->wp_gpio as the cleanup does not put this. While a minimal fix for this would be to add the gpiod_put() call, we can do better if we split device_register(), and use the tested nvmem_release() cleanup code by initialising the device early, and putting the device. This results in a slightly larger fix, but results in clear code. Note: this patch depends on "nvmem: core: initialise nvmem->id early" and "nvmem: core: remove nvmem_config wp_gpio". [Srini: Fixed subject line and error code handing with wp_gpio while applying.] | ||||
| CVE-2023-52933 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel E4s | 2025-10-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Squashfs: fix handling and sanity checking of xattr_ids count A Sysbot [1] corrupted filesystem exposes two flaws in the handling and sanity checking of the xattr_ids count in the filesystem. Both of these flaws cause computation overflow due to incorrect typing. In the corrupted filesystem the xattr_ids value is 4294967071, which stored in a signed variable becomes the negative number -225. Flaw 1 (64-bit systems only): The signed integer xattr_ids variable causes sign extension. This causes variable overflow in the SQUASHFS_XATTR_*(A) macros. The variable is first multiplied by sizeof(struct squashfs_xattr_id) where the type of the sizeof operator is "unsigned long". On a 64-bit system this is 64-bits in size, and causes the negative number to be sign extended and widened to 64-bits and then become unsigned. This produces the very large number 18446744073709548016 or 2^64 - 3600. This number when rounded up by SQUASHFS_METADATA_SIZE - 1 (8191 bytes) and divided by SQUASHFS_METADATA_SIZE overflows and produces a length of 0 (stored in len). Flaw 2 (32-bit systems only): On a 32-bit system the integer variable is not widened by the unsigned long type of the sizeof operator (32-bits), and the signedness of the variable has no effect due it always being treated as unsigned. The above corrupted xattr_ids value of 4294967071, when multiplied overflows and produces the number 4294963696 or 2^32 - 3400. This number when rounded up by SQUASHFS_METADATA_SIZE - 1 (8191 bytes) and divided by SQUASHFS_METADATA_SIZE overflows again and produces a length of 0. The effect of the 0 length computation: In conjunction with the corrupted xattr_ids field, the filesystem also has a corrupted xattr_table_start value, where it matches the end of filesystem value of 850. This causes the following sanity check code to fail because the incorrectly computed len of 0 matches the incorrect size of the table reported by the superblock (0 bytes). len = SQUASHFS_XATTR_BLOCK_BYTES(*xattr_ids); indexes = SQUASHFS_XATTR_BLOCKS(*xattr_ids); /* * The computed size of the index table (len bytes) should exactly * match the table start and end points */ start = table_start + sizeof(*id_table); end = msblk->bytes_used; if (len != (end - start)) return ERR_PTR(-EINVAL); Changing the xattr_ids variable to be "usigned int" fixes the flaw on a 64-bit system. This relies on the fact the computation is widened by the unsigned long type of the sizeof operator. Casting the variable to u64 in the above macro fixes this flaw on a 32-bit system. It also means 64-bit systems do not implicitly rely on the type of the sizeof operator to widen the computation. [1] https://lore.kernel.org/lkml/000000000000cd44f005f1a0f17f@google.com/ | ||||
| CVE-2023-52940 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm: multi-gen LRU: fix crash during cgroup migration lru_gen_migrate_mm() assumes lru_gen_add_mm() runs prior to itself. This isn't true for the following scenario: CPU 1 CPU 2 clone() cgroup_can_fork() cgroup_procs_write() cgroup_post_fork() task_lock() lru_gen_migrate_mm() task_unlock() task_lock() lru_gen_add_mm() task_unlock() And when the above happens, kernel crashes because of linked list corruption (mm_struct->lru_gen.list). | ||||
| CVE-2023-52941 | 1 Linux | 1 Linux Kernel | 2025-10-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: isotp: split tx timer into transmission and timeout The timer for the transmission of isotp PDUs formerly had two functions: 1. send two consecutive frames with a given time gap 2. monitor the timeouts for flow control frames and the echo frames This led to larger txstate checks and potentially to a problem discovered by syzbot which enabled the panic_on_warn feature while testing. The former 'txtimer' function is split into 'txfrtimer' and 'txtimer' to handle the two above functionalities with separate timer callbacks. The two simplified timers now run in one-shot mode and make the state transitions (especially with isotp_rcv_echo) better understandable. | ||||
| CVE-2023-52980 | 1 Linux | 1 Linux Kernel | 2025-10-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: block: ublk: extending queue_size to fix overflow When validating drafted SPDK ublk target, in a case that assigning large queue depth to multiqueue ublk device, ublk target would run into a weird incorrect state. During rounds of review and debug, An overflow bug was found in ublk driver. In ublk_cmd.h, UBLK_MAX_QUEUE_DEPTH is 4096 which means each ublk queue depth can be set as large as 4096. But when setting qd for a ublk device, sizeof(struct ublk_queue) + depth * sizeof(struct ublk_io) will be larger than 65535 if qd is larger than 2728. Then queue_size is overflowed, and ublk_get_queue() references a wrong pointer position. The wrong content of ublk_queue elements will lead to out-of-bounds memory access. Extend queue_size in ublk_device as "unsigned int". | ||||
| CVE-2025-36128 | 4 Ibm, Linux, Microsoft and 1 more | 6 Aix, I, Mq and 3 more | 2025-10-28 | 7.5 High |
| IBM MQ 9.1, 9.2, 9.3, 9.4 LTS and 9.3, 9.4 CD is vulnerable to a denial of service, caused by improper enforcement of the timeout on individual read operations. By conducting slowloris-type attacks, a remote attacker could exploit this vulnerability to cause a denial of service. | ||||
| CVE-2025-21803 | 1 Linux | 1 Linux Kernel | 2025-10-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: Fix warnings during S3 suspend The enable_gpe_wakeup() function calls acpi_enable_all_wakeup_gpes(), and the later one may call the preempt_schedule_common() function, resulting in a thread switch and causing the CPU to be in an interrupt enabled state after the enable_gpe_wakeup() function returns, leading to the warnings as follow. [ C0] WARNING: ... at kernel/time/timekeeping.c:845 ktime_get+0xbc/0xc8 [ C0] ... [ C0] Call Trace: [ C0] [<90000000002243b4>] show_stack+0x64/0x188 [ C0] [<900000000164673c>] dump_stack_lvl+0x60/0x88 [ C0] [<90000000002687e4>] __warn+0x8c/0x148 [ C0] [<90000000015e9978>] report_bug+0x1c0/0x2b0 [ C0] [<90000000016478e4>] do_bp+0x204/0x3b8 [ C0] [<90000000025b1924>] exception_handlers+0x1924/0x10000 [ C0] [<9000000000343bbc>] ktime_get+0xbc/0xc8 [ C0] [<9000000000354c08>] tick_sched_timer+0x30/0xb0 [ C0] [<90000000003408e0>] __hrtimer_run_queues+0x160/0x378 [ C0] [<9000000000341f14>] hrtimer_interrupt+0x144/0x388 [ C0] [<9000000000228348>] constant_timer_interrupt+0x38/0x48 [ C0] [<90000000002feba4>] __handle_irq_event_percpu+0x64/0x1e8 [ C0] [<90000000002fed48>] handle_irq_event_percpu+0x20/0x80 [ C0] [<9000000000306b9c>] handle_percpu_irq+0x5c/0x98 [ C0] [<90000000002fd4a0>] generic_handle_domain_irq+0x30/0x48 [ C0] [<9000000000d0c7b0>] handle_cpu_irq+0x70/0xa8 [ C0] [<9000000001646b30>] handle_loongarch_irq+0x30/0x48 [ C0] [<9000000001646bc8>] do_vint+0x80/0xe0 [ C0] [<90000000002aea1c>] finish_task_switch.isra.0+0x8c/0x2a8 [ C0] [<900000000164e34c>] __schedule+0x314/0xa48 [ C0] [<900000000164ead8>] schedule+0x58/0xf0 [ C0] [<9000000000294a2c>] worker_thread+0x224/0x498 [ C0] [<900000000029d2f0>] kthread+0xf8/0x108 [ C0] [<9000000000221f28>] ret_from_kernel_thread+0xc/0xa4 [ C0] [ C0] ---[ end trace 0000000000000000 ]--- The root cause is acpi_enable_all_wakeup_gpes() uses a mutex to protect acpi_hw_enable_all_wakeup_gpes(), and acpi_ut_acquire_mutex() may cause a thread switch. Since there is no longer concurrent execution during loongarch_acpi_suspend(), we can call acpi_hw_enable_all_wakeup_gpes() directly in enable_gpe_wakeup(). The solution is similar to commit 22db06337f590d01 ("ACPI: sleep: Avoid breaking S3 wakeup due to might_sleep()"). | ||||
| CVE-2025-21813 | 1 Linux | 1 Linux Kernel | 2025-10-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: timers/migration: Fix off-by-one root mis-connection Before attaching a new root to the old root, the children counter of the new root is checked to verify that only the upcoming CPU's top group have been connected to it. However since the recently added commit b729cc1ec21a ("timers/migration: Fix another race between hotplug and idle entry/exit") this check is not valid anymore because the old root is pre-accounted as a child to the new root. Therefore after connecting the upcoming CPU's top group to the new root, the children count to be expected must be 2 and not 1 anymore. This omission results in the old root to not be connected to the new root. Then eventually the system may run with more than one top level, which defeats the purpose of a single idle migrator. Also the old root is pre-accounted but not connected upon the new root creation. But it can be connected to the new root later on. Therefore the old root may be accounted twice to the new root. The propagation of such overcommit can end up creating a double final top-level root with a groupmask incorrectly initialized. Although harmless given that the final top level roots will never have a parent to walk up to, this oddity opportunistically reported the core issue: WARNING: CPU: 8 PID: 0 at kernel/time/timer_migration.c:543 tmigr_requires_handle_remote CPU: 8 UID: 0 PID: 0 Comm: swapper/8 RIP: 0010:tmigr_requires_handle_remote Call Trace: <IRQ> ? tmigr_requires_handle_remote ? hrtimer_run_queues update_process_times tick_periodic tick_handle_periodic __sysvec_apic_timer_interrupt sysvec_apic_timer_interrupt </IRQ> Fix the problem by taking the old root into account in the children count of the new root so the connection is not omitted. Also warn when more than one top level group exists to better detect similar issues in the future. | ||||
| CVE-2025-21815 | 1 Linux | 1 Linux Kernel | 2025-10-28 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/compaction: fix UBSAN shift-out-of-bounds warning syzkaller reported a UBSAN shift-out-of-bounds warning of (1UL << order) in isolate_freepages_block(). The bogus compound_order can be any value because it is union with flags. Add back the MAX_PAGE_ORDER check to fix the warning. | ||||
| CVE-2025-21822 | 1 Linux | 1 Linux Kernel | 2025-10-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ptp: vmclock: Set driver data before its usage If vmclock_ptp_register() fails during probing, vmclock_remove() is called to clean up the ptp clock and misc device. It uses dev_get_drvdata() to access the vmclock state. However the driver data is not yet set at this point. Assign the driver data earlier. | ||||
| CVE-2024-58057 | 1 Linux | 1 Linux Kernel | 2025-10-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: idpf: convert workqueues to unbound When a workqueue is created with `WQ_UNBOUND`, its work items are served by special worker-pools, whose host workers are not bound to any specific CPU. In the default configuration (i.e. when `queue_delayed_work` and friends do not specify which CPU to run the work item on), `WQ_UNBOUND` allows the work item to be executed on any CPU in the same node of the CPU it was enqueued on. While this solution potentially sacrifices locality, it avoids contention with other processes that might dominate the CPU time of the processor the work item was scheduled on. This is not just a theoretical problem: in a particular scenario misconfigured process was hogging most of the time from CPU0, leaving less than 0.5% of its CPU time to the kworker. The IDPF workqueues that were using the kworker on CPU0 suffered large completion delays as a result, causing performance degradation, timeouts and eventual system crash. * I have also run a manual test to gauge the performance improvement. The test consists of an antagonist process (`./stress --cpu 2`) consuming as much of CPU 0 as possible. This process is run under `taskset 01` to bind it to CPU0, and its priority is changed with `chrt -pQ 9900 10000 ${pid}` and `renice -n -20 ${pid}` after start. Then, the IDPF driver is forced to prefer CPU0 by editing all calls to `queue_delayed_work`, `mod_delayed_work`, etc... to use CPU 0. Finally, `ktraces` for the workqueue events are collected. Without the current patch, the antagonist process can force arbitrary delays between `workqueue_queue_work` and `workqueue_execute_start`, that in my tests were as high as `30ms`. With the current patch applied, the workqueue can be migrated to another unloaded CPU in the same node, and, keeping everything else equal, the maximum delay I could see was `6us`. | ||||
| CVE-2022-47986 | 3 Ibm, Linux, Microsoft | 3 Aspera Faspex, Linux Kernel, Windows | 2025-10-27 | 9.8 Critical |
| IBM Aspera Faspex 4.4.2 Patch Level 1 and earlier could allow a remote attacker to execute arbitrary code on the system, caused by a YAML deserialization flaw. By sending a specially crafted obsolete API call, an attacker could exploit this vulnerability to execute arbitrary code on the system. The obsolete API call was removed in Faspex 4.4.2 PL2. IBM X-Force ID: 243512. | ||||
| CVE-2025-36002 | 3 Ibm, Linux, Microsoft | 5 Aix, Sterling B2b Integrator, Sterling File Gateway and 2 more | 2025-10-25 | 5.5 Medium |
| IBM Sterling B2B Integrator 6.2.0.0 through 6.2.0.5, and 6.2.1.0 and IBM Sterling File Gateway 6.2.0.0 through 6.2.0.5, and 6.2.1.0 stores user credentials in configuration files which can be read by a local user. | ||||
| CVE-2022-49698 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: use get_random_u32 instead of prandom bh might occur while updating per-cpu rnd_state from user context, ie. local_out path. BUG: using smp_processor_id() in preemptible [00000000] code: nginx/2725 caller is nft_ng_random_eval+0x24/0x54 [nft_numgen] Call Trace: check_preemption_disabled+0xde/0xe0 nft_ng_random_eval+0x24/0x54 [nft_numgen] Use the random driver instead, this also avoids need for local prandom state. Moreover, prandom now uses the random driver since d4150779e60f ("random32: use real rng for non-deterministic randomness"). Based on earlier patch from Pablo Neira. | ||||
| CVE-2022-49723 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/reset: Fix error_state_read ptr + offset use Fix our pointer offset usage in error_state_read when there is no i915_gpu_coredump but buf offset is non-zero. This fixes a kernel page fault can happen when multiple tests are running concurrently in a loop and one is producing engine resets and consuming the i915 error_state dump while the other is forcing full GT resets. (takes a while to trigger). The dmesg call trace: [ 5590.803000] BUG: unable to handle page fault for address: ffffffffa0b0e000 [ 5590.803009] #PF: supervisor read access in kernel mode [ 5590.803013] #PF: error_code(0x0000) - not-present page [ 5590.803016] PGD 5814067 P4D 5814067 PUD 5815063 PMD 109de4067 PTE 0 [ 5590.803022] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 5590.803026] CPU: 5 PID: 13656 Comm: i915_hangman Tainted: G U 5.17.0-rc5-ups69-guc-err-capt-rev6+ #136 [ 5590.803033] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-M LP4x RVP, BIOS ADLPFWI1.R00. 3031.A02.2201171222 01/17/2022 [ 5590.803039] RIP: 0010:memcpy_erms+0x6/0x10 [ 5590.803045] Code: fe ff ff cc eb 1e 0f 1f 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 fe [ 5590.803054] RSP: 0018:ffffc90003a8fdf0 EFLAGS: 00010282 [ 5590.803057] RAX: ffff888107ee9000 RBX: ffff888108cb1a00 RCX: 0000000000000f8f [ 5590.803061] RDX: 0000000000001000 RSI: ffffffffa0b0e000 RDI: ffff888107ee9071 [ 5590.803065] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 [ 5590.803069] R10: 0000000000000001 R11: 0000000000000002 R12: 0000000000000019 [ 5590.803073] R13: 0000000000174fff R14: 0000000000001000 R15: ffff888107ee9000 [ 5590.803077] FS: 00007f62a99bee80(0000) GS:ffff88849f880000(0000) knlGS:0000000000000000 [ 5590.803082] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5590.803085] CR2: ffffffffa0b0e000 CR3: 000000010a1a8004 CR4: 0000000000770ee0 [ 5590.803089] PKRU: 55555554 [ 5590.803091] Call Trace: [ 5590.803093] <TASK> [ 5590.803096] error_state_read+0xa1/0xd0 [i915] [ 5590.803175] kernfs_fop_read_iter+0xb2/0x1b0 [ 5590.803180] new_sync_read+0x116/0x1a0 [ 5590.803185] vfs_read+0x114/0x1b0 [ 5590.803189] ksys_read+0x63/0xe0 [ 5590.803193] do_syscall_64+0x38/0xc0 [ 5590.803197] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 5590.803201] RIP: 0033:0x7f62aaea5912 [ 5590.803204] Code: c0 e9 b2 fe ff ff 50 48 8d 3d 5a b9 0c 00 e8 05 19 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 [ 5590.803213] RSP: 002b:00007fff5b659ae8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 5590.803218] RAX: ffffffffffffffda RBX: 0000000000100000 RCX: 00007f62aaea5912 [ 5590.803221] RDX: 000000000008b000 RSI: 00007f62a8c4000f RDI: 0000000000000006 [ 5590.803225] RBP: 00007f62a8bcb00f R08: 0000000000200010 R09: 0000000000101000 [ 5590.803229] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000006 [ 5590.803233] R13: 0000000000075000 R14: 00007f62a8acb010 R15: 0000000000200000 [ 5590.803238] </TASK> [ 5590.803240] Modules linked in: i915 ttm drm_buddy drm_dp_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops prime_numbers nfnetlink br_netfilter overlay mei_pxp mei_hdcp x86_pkg_temp_thermal coretemp kvm_intel snd_hda_codec_hdmi snd_hda_intel ---truncated--- | ||||
| CVE-2022-49724 | 1 Linux | 1 Linux Kernel | 2025-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tty: goldfish: Fix free_irq() on remove Pass the correct dev_id to free_irq() to fix this splat when the driver is unbound: WARNING: CPU: 0 PID: 30 at kernel/irq/manage.c:1895 free_irq Trying to free already-free IRQ 65 Call Trace: warn_slowpath_fmt free_irq goldfish_tty_remove platform_remove device_remove device_release_driver_internal device_driver_detach unbind_store drv_attr_store ... | ||||
| CVE-2022-49726 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: clocksource: hyper-v: unexport __init-annotated hv_init_clocksource() EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the only in-tree call-site, arch/x86/kernel/cpu/mshyperv.c is never compiled as modular. (CONFIG_HYPERVISOR_GUEST is boolean) | ||||